Chuck_Harbert@arkwright.com wrote:
Tracy wrote:
advantage of oil injection was at very low (trolling or idling) where the
oil ratio could be run as low as 150 - 1 (as opposed to 50 - 1 for normal
operation).
Paul, I don't know if I saw everything on this, but at this point I'm a
little confused from the various responses, particularly Paul Yaw, who
indicated that he recommended running both injection and premix. I've got
a quart of Amsoil 2 cycle oil that says to mix at 100:1 which is about an
oz/gal. I'm thinking of disconnecting my injection and using only premix,
so it's kinda important to get it right. Can we get general agreement from
everybody on this? Thx.
There is some hope that a two cycle oil can be found that will work
as system oil.
The consenses is; stick with mixing two cycle oil in
the fuel. One ounce or more per gallon is called for.
How is the turbo three rotor Velocity coming?
Hope all is going well.
BTW what are the length, width and thickness of your rads including
the header tanks?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org