Archie Frangoudis wrote:
This may be a bit abstract, due to my limited rotary knowledge,
however, here goes. In our gasoline piston racing engines,
we try to create as much vacuum in the bottom end as possible.
There are many ways to accomplish this, but the point is, that
when this is done, conventional lip type seals are installed in
reverse. Pros-Cons regarding rotary application?
archie
I think the situation is much different. You don't have a bunch of
pistons pumping up and down inside a closed box. The volume inside
the rotor is not changing.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org