Subject: Two cycle oil as general system oil. Klotz R50
From: Paul
Date: 3/14/1999, 1:20 PM
To: z

Jim Lentine was kind enough to send me some Klotz
R-50 Synthetic Racing Lubricant.
It did indeed look like 50 weight at room temperature.

I gave it the one hour test at 500 degrees F 
and some solids precipated out and formed thick
lumps of black sludge. It was the worst of
the bunch. Smoke poored out of the oven.
It was so bad I am running another sample
just to be sure the oven did not overheat.

I did not burn a sample with the Paul Yaw test
as I have no gasoline handy.

IMHO I would not use it as rotary engine system oil
intended to lube the seals or mix it with the fuel 
to lube the seals.

BTW I soaked a  Mazda green oil seal O-ring in turbine oil
for 36 hours or so and so far no change in the O-ring.
It is a late O-ring probably made from silicone.
The room temperature viscosity of turbine oil is 
way less than the Klotz 50 weight.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org