Subject: Oil & water temps too cool
From: Paul
Date: 3/15/1999, 10:19 AM
To: z

Anderson Ed wrote:

David,
        Yes, I for one, followed the Racing Beat approach and plugged the 1/2"
by-pass hole so I don't need to use the Mazda Themostat.  As Paul L has
suggested you can get by without a thermostat and prehaps gain some drag
reduction benefits by using cowl flaps to regulate coolant temp.  I
intend to stick a themostat in at some point, but just haven't got
around to it.  I use a Stand 24-27psi racing radiator cap.  Coolant
pressure is normally around 15PSI but can get as high as 21 psi in my
set up.  Coolant pressure drops to zero when coolant temp is 150F or
below.

Ed Anderon


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org