Subject: Oil & water temps too cool
From: Paul
Date: 3/15/1999, 11:02 AM
To: z

Tracy Crook wrote:

David Carter wrote:

Tracy,

About the water temp running 155 degrees.  From your engine conversion
manual I believe I remember you expressing a desire to not use a
thermostat, probably to eliminate a failure mode.  For those coming
along behind, I'd like to point out that the Racing Beat catalog tells
how to replace the Mazda "bypass" thermostat with a 30 psi racing
thermostat:  

Snip

David Carter

snip

I agree with Paul about the cowl flap.   The main reason I eliminated the
thermostat was not reliability concerns.  I removed the waterpump outlet
(where the thermostat is housed) for clearance reasons.   It stuck up way
too far to fit under the cowl.

I am a bit mystified by the pressure specs you cited on the thermostats.
What does pressure have to do with a thermostat?

Tracy Crook
 rws@altavista.net

BTW Tracy please check the clock and calender in your computer. 
I think it is a day off or your ISP or my ISP is delaying your
messages. 

These messages were dated Sun at 1 PM and I checked the mail last night 
at midnight and I still had not recieved them. My mail is sorted by
date and time in NS and messages can get lost by having the senders 
clock/calender improperly set.

PL

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org