David Carter wrote:
Chuck, be carefull and don't run that stock water pump too fast.
Check with Racing Beat on that subject. I think the stock pump is
limited to 7200 RPM but that is from memory. Jim M dug up a sprint
car engine water pump someplace for his turbo three rotors but I have
yet to locate the source.
Paul Lamar
Paul & Chuck,
I believe this issue of flow rate and racing water pumps is coming up for
the first time. It is a big deal.
http://www.stewartcomponents.com
is where I
find good thermostats, radiator caps, and Chevy V-8 high flow water pumps,
with long, excellent pages to print about cooling high performance engines
(V-8s, in their specialty). I e-mailed them once and asked if a Chevy V-8
pump could be adapted to a 13B rotary. No answer, probably totally out of
their realm of experience - I/you/we would have to do our own design effort
to mount such thing - but the goal is high flow for better cooling, along
with optimizing other parameters that have been well covered in this forum.
David Carter
The vast majority of Chevy V8 pumps would not work. The one Jim M is
using
is designed to be mounted remotely and belt or gear driven. A picture
of it can be seen on the ACRE web site under Racing Beat 900 HP Three
Rotor etc. I sure would like to find a source for it as I think it
is what is needed for a 300 HP turbo two rotor or a three rotor.
I have asked Jim once and he was rather evasive :-)
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org