Subject: Warp and IVO props.
From: Paul
Date: 3/16/1999, 4:01 PM
To: zz

Gary Palmer wrote:

Jeff,
   I may have missed the Warp Drive application details, but I flew one
for over 350 hours on a Lancair with an O-235C2C Lyc with no delamination
problems. I do know that RVs using them on O-320s were running into
delamination problems after 50 hours or so. According to Warp Drive, this
problem would occur if the blade tip pitch angle exceeded 20 degrees. Mine
was set at about 18 degrees, and the O-320 cases more like 22 degrees.
Looking at the jpeg Paul sent of your diesel, it looks like you are well
past the 20 degree setting; hence the problem. Does my analysis apply here?

Regards.......Gary


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org