Subject: Moving the wing on an RV-4??
From: Paul
Date: 3/17/1999, 8:54 PM
To: zz

Mike Wills wrote:

At 10:42 AM 3/17/99 -0800, you wrote:
Wrathall Mark wrote:
If you were to set up a P-51 style duct on an RV-4, how much weight
would you roughly take out of the engine compartment. How many inches
aft would you have to move the wing?

 I considered a P-51 style rad arrangement and decided against it for my
RV-4. If you have a set of plans, take a look at what would be involved in
trying to stuff a radiator(s) in the baggage compartment. Then consider how
would you get the coolant to/from the engine past the spar? Then do you
exit your exhaust out the side of the cowl to keep hot exhaust out of your
radiator inlet? And finally are you qualified to redesign the aircraft
structure to accomodate this? Remember that the RVs are monocoque designs;
the skin is the structure!
 And why would you want to do this when others are successfully flying with
the cooling system stuffed up front? Of all the RVs the -4 is the most
tolerant of extra weight on the nose. Many -4 builders go to metal props,
harmonic balancers, and even cs props to move the cg forward if the goal is
cross country flight with a passenger and baggage.

Mike Wills

You have some excellent points there Mike. Liquid cooled engines take 
planning from the get go.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org