Bruce A. Frank wrote:
Over the last 5 years I have spent a total of several hours at the Warp
Drive booth at Sun 'N Fun. Five years ago the big talk was a new blade
design with a larger shank to be out in "just a few months". The reason for
this new blade was because failures of the Warp Drive in pusher
configurations, particularly in Long EZs. They told me that the turbulant
air flow enviornment of the pusher caused severe "working" of the prop shank
that eventually lead to the blade's becoming soft just outside the hub
clamping area. Bacause of that problem and after discussions with Rutan they
concluded that they could not recommend their prop on pusher configurations.
But, unless you push the question, as I did, you wouldn't get told that and
they will still sell you a prop for your pusher(I guess they just wish for
the best--some pusher applications have not failed). THe failure is gradual,
not suddenly catastraphic and easily detectable if you hand flex the prop
during pre-flight.
Their stated reason for never introducing the larger shanked blades is they
"don't have time to finish the design and testing because business is so
good". Five years after the first mention of this re-design I am still
waiting. Warp Drive stated that there have been NO such failures on tractor
configurations.
Bruce A. Frank
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org