Bktrub@aol.com wrote:
I talked with Dennis Hayes of Hayes Rotary and he had some problems using an
Ellison throttle body on a rotary. I don't know what the problem was, but
using Tracy's EFI is still less expensive than an Ellison. By the way, I'm
just starting on my RV-4 fuselage, plan to use a P-51 style scoop and put the
prop hub and hence the engine about 5" forward of stock. To that end, I have
fabricated an aluminum cowl. (I was lucky enough to find a guy
who has an english wheel and was willing to let me use it). I will get
the preliminary plan for the scoop scanned to a disc so I can post it here-
what I need is the input of the contributors to this newletter on the scoop
design.
Brian Trubee
If the inside of the duct looks like this you can't go wrong. I have
already
uploaded the coordinates. That's a flap on the back.
use four thin rads back to back with water going into the rear one
first.
15 by 16 by four inches thick. See the sketch I previously uploaded.
You need of course a boundry layer bypass between the scoop and
the belly.
Paul Lamar ductgood.jpg
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org