MAR34807@aol.com wrote:
Now this would make a great experimental aircraft set up. Seems to have worked
fine YEARS ago!
From: Tom Griner <TEG@vicor.com>
Subject: (rx7) Considering sale of Rx7
Hi,
I am considering getting rid of my propane powered
Rx7 as I haven't used it in a long time, and it is collecting
dust.
If you know of someone who might be interested, could
you pass them along this info?
It it sort of an odd car at this point, so it may be
hard for me to find a buyer, but here are some
of the details:
I bought the car new in 1983.
It has about 20k miles total on it.
It started life as a GSL, so has limited
slip diff, glass-moonroof, power windows, etc.
No accidents... No rust... Fiberglass body
kit installation was NOT professionally
installed...
It has been auto-crossed about 6 times.
The rear fuel tank was "cut out", and replaced
by two aluminum forklift propane (LPG) cylinders.
It has high pressure copper LPG lines running
to an IMPCO model E propane carburetor.
The engine is a Rotary Engineering "Turbo Alternative"
13B block. It made 225hp when it was normally aspirated,
but makes alot more now with the 112 octane propane & turbo.
It has carbon fiber apex seals, a lightweight
aluminum flywheel, and new centerforce clutch.
It has a Racing Beat "holly style" manifold which accepts
the propane carburetor.
It has a "small" (quick spool up) turbo from a Ford Mustang SVO.
It has an intercooler from a Ford Thunderbird Turbo.
Upgraded oil cooler. Upgraded Radiator. Dual oil filters.
Crank angle sensor from 1985 Rx7 modified to trigger
dual MSD 6A CDI boxes. (only runs two plugs). Have
original 1983 Electronic Distributor sitting in a box.
It has a custom fabricated dual exhaust.
It has a Pacific T-Top fiberglass body kit, and a factory
air dam and tail, with a hideous black paint job (which is
chipping off at the moment). It has been lowered with
suspension techniques springs & sway bars. Koni adjustable
shocks/struts all around. 10x15 Gotti wheels
with 285x40zr15 Yokahama AVS-Intermediate rears.
7x15 Gotti wheels with 225x50zr15 AVS-Intermediate front.
Dino leather steering wheel. Air horns. Various little
upgrades - steel brakes lines, higher quality suspension
bushings, etc, etc. Hand made dashboard with VDO guages.
Engine Brace. Tinted Plexiglass rear windows...
No A/C, no radio, no heater... It does still have power windows
and power mirrors.
Car has been parked in a garage in Palo Alto, California
for the past 7 years.
My best guess is that the only person who would be happy
with this car, is someone that wants to use it as the basis
of a drag or race car...
I have a G-Force computer which shows the car doing 0-60
in around 4.5...
It used to be emissions exempt (propane powered), but the
rules are somewhat "iffy" these days. It is loud,
and not very "streetable". If sold together it may
need to be sold as a collection of "parts" for "offroad
use only".
I don't have a price in mind, and may consider parting
it out...
(I am driving MR2s these days...)
-Tom Griner
TEG@vicor.com
Be careful of long term parked rotary engined cars. The rotor housings
could be corroded to useless if the coolant was not drained.
I would more likely buy it if the engine was disassembled.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org