Subject: Water radiator size
From: Paul
Date: 3/18/1999, 9:09 AM
To: zz

Pebvjs@aol.com wrote:

Paul,

Honda Civic 89 - 91 1.5 L engine.
Radiator core size  28" W x 13" H x .75" TK.
Tanks Top & bottom, vertical tubes.
NIPPONDENSO MFG. USA INC.
Number on rad [ 122000-0020 ] [ 11J ]

 

Thanks for the info on the rad. Sounds even better then the Toyota
as cut in half it would be 13 by 14.

This gives us a lot more options. We have core thicknesses in 1/4 inch
increments using Just Toyoto and Honda rads 
from 1/2 inch through 2 inches.

If you cut and fold the thin rads. Why wont you end up with the same air flow
resistance thru the core?  The effective core thickness ends up about the
same.

Ed.


Absolutely! But it will transfer more heat for a given thickness!
Instead of a 4 inch solid core rad we might be able to get along with 
a 3 inch thick rad using four 3/4 inch Honda  cores.

This illustrates so well why the thermal efficiency of the rad affects
the aerodynamic efficiency.

A very good question Ed. Thanks for bringing that up.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org