Marvin Kaye wrote:
At 05:34 PM 3/22/99 -0800, Jeff Spitzer wrote:
This brings up a pet peeve (sp?) of mine. Most people use guages that are
referenced to atmosphere to measure fuel pressure. These are called
"guage" pressure as compared to absolute or differential measurements where
a different reference can be used. At the same time most fuel injection
systems require the fuel pressure regulator to be connected to the intake
manifold so that the fuel pressure will go up and down with manifold
pressure. So...if you are reading a "guage pressure" sensor on your fuel
pressure then either you convert your MAP to psi and do the math in your
head or you never really know if you've got the right fuel pressure.
Anyone know of a good cheap *differential* pressure sensor to use for fuel
pressure?
Based on this discussion I have to wonder if the fuel pressure regulator
can be plumbed into the intake manifold for _its_ reference pressure? That
would certainly make the most sense, wouldn't it? Then you could use a
simple fuel pressure gauge because the regulator would be doing the
conversion work, wouldn't it?? Fuel pressure would be totally dependent on
MAP....
Or maybe not.....????
I'd also like to hear about what kind of pressure regulators folks are
using... I've gotten a great amount of feedback about the hi-press EFI fuel
pumps (thanks everyone, you know who you are!) and have plenty to choose
from in that regard. If there's a pressure regulator that operates as
outlined above (and that suggestion makes sense), where would I find one of
these beasts?
<Marv>
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org