Marvin Kaye wrote:
At 05:34 PM 3/22/99 -0800, Jeff Spitzer wrote:
This brings up a pet peeve (sp?) of mine. Most people use guages that are
referenced to atmosphere to measure fuel pressure. These are called
"guage" pressure as compared to absolute or differential measurements where
a different reference can be used. At the same time most fuel injection
systems require the fuel pressure regulator to be connected to the intake
manifold so that the fuel pressure will go up and down with manifold
pressure. So...if you are reading a "guage pressure" sensor on your fuel
pressure then either you convert your MAP to psi and do the math in your
head or you never really know if you've got the right fuel pressure.
Anyone know of a good cheap *differential* pressure sensor to use for fuel
pressure?
Based on this discussion I have to wonder if the fuel pressure regulator
can be plumbed into the intake manifold for _its_ reference pressure? That
would certainly make the most sense, wouldn't it? Then you could use a
simple fuel pressure gauge because the regulator would be doing the
conversion work, wouldn't it?? Fuel pressure would be totally dependent on
MAP....
I think we have a little problem here Marv. Future messages are going to
depend
on clearing this up.
Depends on what you mean when you say "simple". Jeff is saying the
reference
pressure of the guage is usually atmospheric and not intake manifold
pressure.
He want to know what the fuel pressure is relative to intake manifold
pressure.
The pressure regulators are already hooked to and referenced from intake
manifold pressure. I checked the fuel pressure in my Cougar recently
and what Jeff is saying was correct. I had no idea what the real
fuel pressure was relative to the intake manifold pressure.
That is the really important peice of information.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org