Subject: Weight of RV-6
From: Paul
Date: 3/23/1999, 10:07 PM
To: zz

Alan Tolle wrote:

Response to Jim Mosur.

Don't get me wrong here. Jim.  Nothing which I said about your installation
was intended to be criticism.  I am just making an observation based on the
data which your weight and balance supplied.  The same thing goes for Ed
Anderson.

If you look back at the example weight and balance page in your RV-6
builders manual you will see that Van's prototype weighed in a t 955 pounds
with an 0320 and a wood prop.  The paint was on, the ELT was in, both seats
were atrocious, and the panel was thin.  Van is very well known for being
very weight conscious and you have no idea the lengths he will go to  same a
pound here, a pound there.  It all adds up to better performance.  So I an
not surprised that most projects come out heavier than the factory
prototype.

I didn't use my own RV-6 in the comparison earlier, but I will now.  The
completed weight or my RV-6 project was 1050 lbs, or 7 lbs less than yours.
(You have noted earlier that you still have to install the wheel pants,
landing gear leg faring, and cuffs.  If you didn't have those on the scales
originally you will add about 13 more lbs when you do install them.)  It had
a full IFR panel of instruments and radios, a 180 hp Lycoming,  a long hub
Hartzell constant speed prop., fully upholstered seats, sound deadening
material all around forward of the wing main spar, and insulated carpets.  I
can account for nearly every one of the extra 95 lbs over the factory
prototype.  I made no real effort to keep the weight down (like cutting
lightening holes in everything like Van did) beyond being careful with wire
size and individual instrument weight, which didn't save much.  Most of the
extra weight was up front, so my CG was forward of the prototype about an
inch, just like yours.  Which is just exactly what you want to do with the
CG of an RV-6 if you possibly can.

I don't say there is anything wrong with the extra weight of the rotary
engine conversion beyond some slight performance losses.  Certainly the
airframe can carry the extra 100 pounds except when it comes to aerobatic
gross.  I am just curious as to where it is, and if any of it can be safely
chiseled off in future projects.

BTW the Powersport 200 engine with gear box and accessories weighed  5 to 8
pounds more than the engine described by Chris Ross in the premiere Contact
monograph article, which engine also had a gear box and the same
accessories.  So the weight difference isn't in the basic engine.

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org