Subject: Fuel pressure gage hook-ups.
From: Paul
Date: 3/25/1999, 7:23 PM
To: zz

Jeff Spitzer wrote:

Marvin Kaye wrote:
 And since the regulator's pressure
is dependent on MAP, then ostensibly the reading we get on the fuel
pressure gauge should actually track the MAP pretty closely so we're
looking at an operating range of what, from 35 to maybe 65psi (if we're
using some boost) assuming that flow rates were calculated with MAP at
atmospheric and we want a MAP-regulated pressure of 50psi.

I guess the thing I don't understand is why do we care?  As long as the
fuel pressure gauge tells me that my system has the pressure it was setup
to run at, once I"m flying it's really all I care about.

I would rather look at my fuel pressure guage and have it always read 40
psi or whatever regardless of MAP or altitude.  That way I know everything
is hunky dory.  If everytime I look at the guage it's reading something
different then it will never look bad until it's too late e.g. reading zero!

Jeff Spitzer


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org