Anderson Ed wrote:

Actually, my intake system is more like Neils than Tracys.  I also use
the Dolorto (weber) heavy cast upper manifold with a weber throttle body
from TMW.  Neil uses two injectors on the outside side of the throttle
body due to clearance problems on the block side.  I was able to (due to
my homemade manifold (bottom) position my throttle body far enough away
from the block (barely) to have injectors on both sides of the throttle
body.

Ed Anderson

Now that you are redoing it can you get the injectors closer
to the rotor housing?

Paul

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org