Subject: The oil thing again & Mobil 1 with 100LL
From: Paul
Date: 3/26/1999, 4:51 PM
To: zz

Tracy Crook wrote:

Mark Steitle wrote:


I would like to try and get something cleared up in my mind.  I may be
mistaken, but I has been my understanding that the rotary's combustion
process is isolated from the crankcase, unlike reciprocating piston
engines.  If this is the case, how can 100LL cause a problem when used
in the rotary's sump?

Mark

Good question but I don't think the combustion in the
rotary is all THAT isolated from the eccentric case.
The side metal seals are a lot like piston engine rings.

I would like to know what does it mean to "scavenge lead."

Paul

Check out the detail on the sides of the rotors.  There is a passage which
routes blow-by from the side seals right back to the intake ports.   This is
the reason the oil stays so clean on a rotary.  At 50 hours, my oil still
looks like new on the dipstick.

The way I heard the Mobil 1 aircraft story, synthetic oil does not hold
metallic content in suspension as well as mineral oil which allowed lead to
collect between ring lands on the piston.   Any experts out there on this?
A minor distinction and I'm not sure what the difference is.

Tracy Crook
 rws@altavista.net

Good point Tracy. It only has a brief instant to do this.
I wonder how a tuned manifold with a pressure pulse arriving
at just the wrong time would affect this. The blow by
pressure would have to be greater than this pressure
pulse which I suppose is quite likely.

A super charged engine would also have a high intake
manifold pressure. Anybody with a turbo RX7 notice dirty oil?

Very interesting.

A peripheral port would not have that feature.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org