Subject: Auto transmission planetary gear sets
From: Paul
Date: 3/28/1999, 11:32 AM
To: zz

Alan Tolle wrote:

Some of the readers of this newsletter seem to be pretty knowledgeable about
SAE papers, and I would appreciate some help in finding a certain one.

In about 1994 Everett Hatch showed me an SAE paper written by a retired
engineer from either Ford or GM whose working responsibility had been
automatic transmissions and their planetary gear sets.

In that paper the engineer addressed specifically the situation involving
the use of an automotive planetary gear set to reduce the propeller rpm in
the aircraft application.  My recollection is incomplete, but I think he
included discussion about lubrication and "stacking and unstacking" of the
planetary gear needle bearings with torque/reversing torque of the aircraft
propeller.

I would very much like to revisit that paper.  If anyone has access to a
cross reference index of the SAE publications, I would appreciate the
author's name or the paper number.

Thanks to anyone who can help.

A lot of university librarys have a computer program to look up this
sort of thing. You coudls also try the SAE web site. 
http://www.sae.org/

A very interesting bit of information is that Ross failed to
take advantage of a small lubrication hole in the sun gear designed
by Ford to pressure lubricate the planetary set. Never the less
the Ross gearbox lasted 600 hours in Tracy's airplane.
 
This hole is almost un-noticeable. I was not aware of it 
until Tracy Crook pointed it out to me. Tracy is planning
on implementing that feature in his PSRU design using the Ford
planetary and plain bearings rather than the Ross needle bearing
set up. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org