Todd Carrico wrote:
After I posted this it occured to me that you may not get much flow(oil)
through the cooler. It just lays there. The Tube setup would get some flow
just from A/C movement.
Any thoughts on this.
You could baffle it and make all the oil filter down through the
cooler to the oil pick up tube in the bottom. Make sure you run
multi-weight oil as cold 40 or 50 weight oil does not flow too
good.
Paul
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org