Subject: Internal spur gear PSRU's.
From: Paul
Date: 3/30/1999, 12:51 PM
To: zz

Jeff Spitzer wrote:


allipsr2.jpg

Interesting post and pic.  Also note that the output shaft consisted of two
concentric "quill" shafts.  This is the torsional damper needed for all
reduction drive airplane engines.  In the Ross unit the damper is installed
between the crank and the gears.  In the Allison example it is between the
prop and gears.  These are basically your two choices.

Jeff Spitzer

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org