Paul Yaw wrote:

Paul wrote:

virgil n. salisbury wrote:

At 12:18 AM 4/30/99 -0700, you wrote:

Ken Powell wrote:

I have 2 rotors that have so much carbon built up that I can't get the
side seals out.  I thought of soaking them in carburator cleaner, but
hate to ruin the bearings.  Does anyone have a method to remove these
especially stubborn side seals?  Sorry if this was brought up before I
joined the group.

     Thanks,
     Ken Powell

        >

If you can find AMSOIL Power Foam, It might do the trick. I am a dealer but

   usually only buy for my needs.
        Virg

Most synthetic engine oils will dissolve that crap if you let it soak.
If that doesn't work, all you have to do is drive to Arizona and put
them in my hot tank.  Think of the hard labor you will save!

PY

Looks like you got a little businees going there Paul.
Ship your rotors to Paul Y he soaks them and ships them back :-)
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org