Subject: Decision, Decision! - Replace rotor housings?
From: Paul
Date: 5/1/1999, 10:44 PM
To: zz

David Carter wrote:

Paul Yaw wrote:
Hi there,

That amount of time does not sound unreasonable at all, especially if
you do not have a hot tank for parts cleaning.  There are two absolutes
when rebuilding an engine.  The parts can not be too clean, and the side
housings can not be too flat.  If you build the engine yourself PLEASE
replace ALL seals, both rotor housings, and have the side housings
resurfaced.  Just do it right, and you will probably never have to mess
with it again.

Paul Yaw

David Carter askes:

Paul Yaw, did you really mean "replace both rotor housings" - regardless of
how they look?  I thought you measured the housings and replaced only if out
of tolerance.  ???

David Carter

Since new rotor housings are about $350 each its not that much more 
at about $700 each for Racing Beat peripheral port modified
new housings :-) You can build them your self if you take a course
in machine shop at the local night school and use their lathe
and mill.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org