Subject: Exhaust systems/ peripheral ports
From: Paul
Date: 5/1/1999, 11:06 AM
To: zz

Todd Carrico wrote:

Mike Wills wrote:

 Ive been looking at the tuned and un-tuned mufflers depicted on Paul's
ACRE website. Any comments regarding how these would perform on a 13B
configured about like Tracy's (yeah I realize Tracy is using a muffler
that
is essentially Paul's untuned version). What Im wondering is how they
compare power wise to each other and then to a conventional header? And
then throw Ed Anderson's design in too, with totally independant pipes
how
would it stack up against the others?

 From what I understand the greatest gains to be made in a normally
aspirated rotary is in the exhaust tuning. So what do you experts say?

 Still waiting to hear comments regarding peripheral porting in the
4500 -
6500 rpm band, and suitability of off the shelf (i.e. Racing Beat)
peripheral port housings in this rpm range.

Mike Wills

Mike,
I believe I read somewhere that the exaust pulse of the rotary takes 30+
inch primaries before you start getting any benefit from tuning.  This makes
for a very heavy instalation.  30+ inches of SS, or Inconel times 2.  I have
heard mention of a Two stroke style expansion chamber maybe working, but my
bet would go to Pauls Tangentialy tuned muff on his web site.  Compact, and
proabably good at making power, and keeping noise down.

tc


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org