David Carter wrote:
XXXXX wrote:
Usually this code indicates a slow or failed O2 sensor. Other causes
are possible, such as an exhaust leak upstream of the sensor. In
between firing pulses a leak can draw in fresh air, fooling the sensor.
An intake manifold leak can cause one bank to read lean, too.
re "exhaust leak upstream of sensor . . ." - both my '93 and '95 Ford
Escorts had the nuts loose on the exhaust manifold studs - '93 at 120,000
were all "finger loose". '95 at 70,000 were "wrench loose" - not torqued.
No running problems on these two cars - just might be something for you to
check on your car.
David Carter
Thanks David I will have a look.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org