I will anticipate your next question.
"What about low speed torque with peripheral
ports?" My answer is: it is just not needed with a prop
load.
Assuming that prop load HP is proportional to
RPM cubed you can plug the actual Lemans engine HP
as a function of RPM into this prop load chart and see
if there is any excess HP avaialble at lower RPM's
to accelerate the prop RPM's. I think there will be.
I suspect the static thrust might be slightly
lower with a peripheral port engine but it
should build up much faster as the airplane
starts moving.
Engine Prop Load
RPM HP Required
1000 1
1250 2
1500 3
1750 5
2000 7
2250 10
2500 14
2750 19
3000 24
3250 31
3500 39
3750 47
4000 58
4250 69 Aprox. static RPM with 2.17:1 PSRU
4500 82
4750 96
5000 113
5250 130
5500 150
5750 171
6000 194
6250 220 Max engine HP with 2.17:1 PSRU
6500 247
6750 277
7000 309
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org