Alfonso Lebron wrote:
Thanks for the explanation. If things hold true, I am going for peripheral
porting. Should put the Lycos to tremble when comparing HP per pound of
weight in the normally aspirated cadre, not to mention a turbocharged 13B.
Alfonso Lebron
Absolutely. If we get enough of these peripheral port engines
flying it should accellerate the conversion to rotary engines
for aircraft use. Allan Tolle and Everett Hatch opened a lot
eyes with the peripheral port Power Sport rotary.
BTW I forgot to mention the HP required verses RPM chart
was for a fixed pitch prop. A variable pitch prop would
allow the engine to rev way up during the start of takeoff
and the short field performance would be much better.
This is a chart from: http://www.propellor.com/
Variable-pitch-prop-perform.jpg
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org