Subject: Mazda bell housings.
From: Paul
Date: 5/4/1999, 11:02 PM
To: zz

VMAZDA@aol.com wrote:

Paul-
To any one who wants to know. All turbo RX7 from 86 to 92 use the trans with
a separate bell housings. These trans are the same as the RX4 74 to 78, 4
speeds trans and 5 speed trans. Note that the 86 to 92 turbo engine uses a
larger flywheel so the starter mounting hole is located further out(side
ways). If you use this bell housing you have to use the turbo flywheel. Using
the the non turbo flywheel will cause the starter not to mesh with the ring
gear.
Hope this helps.
VINCE-VMAZDA

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org