Bob Darrah wrote:
Paul,
The long through bolts have two areas about an inch long that contain 10
grooves, about .010 deep (per side) and .060 wide, turned such that it
raises a .010 smooth burr all the way around. The 2/3 bolts have one
such area. Something else that has my curiosity up is that some of the
long bolts have what looks like a piece of heat shrink tubing about an
inch long located 1/2 over the groves and 1/2 on the smooth bolt.
Haven't figured outwhat that's for yet.
-Damps destructive vibrations in the bolts.
The injector pump has just the three lines coming from it. I was
wondering if maybe it was putting too much oil in the rear two rotors to
cause that much carbon.
The guy I talked to at Mazdatrix didn't know what I was talking about
when I asked him about the Haynes high performance silicon o rings.
Guess I didn't ask the right question.
-Did I say Haynes? I meant Hayes. there is an ad for Hayes on
-the ACRE NL web site. If the guys at Mazdatrix never heard of
-Hayes Rotary Engineering in Redmond Wash. You will have to
-buy direct. Let us know what the price is. PL
Bob Darrah
hayoring.jpg
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org