Subject: Paul Yaw Turbo HP EGT data
From: Paul
Date: 5/6/1999, 9:47 PM
To: zz

Good afternoon Paul Yaw,
I have read your webpage and installed an MSD6A on the leading ignition of my
1985 Mazda ignition. As I am ready to test it, I am intrigued by your statement
that "also the ignition configuration (leading and trailing firing
simultaneously) hurts the efficiency".Could you please elaborate on that
statement?
Yvon Cournoyer

The leading and trailing plugs normally do not fire at the same time.
In this application they did.  A 13B normally makes best power with
about ten degrees of split between the leading and trailing.  On a
turbocharged engine you can retard the trailing timing more than the
leading under boost for better efficiency because the trailing is more
likely to cause detonation.  This allows you to maintain a reasonable
amount of lead timing, and avoid detonation at the same time.  As an
added benefit, the EGT's will be lower as well.  Probably by 100 degrees
or more.  If I had to run that engine at more than 7 psi of boost, or
spin it much over 7000 rpm I would not use the configuration that I
did.  I don't know exactly how much power I could gain by controlling
the leading and trailing independantly, but on a naturally aspirated
engine it is worth several percent.

PY

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org