Subject: External pump for 2-stroke oil
From: Paul
Date: 5/7/1999, 11:17 AM
To: zz

Brian D. Cain wrote:


Snip..

- Use a separate reservoir w/ pump and measuring floater


I like this idea because it reduces the effect of lowering octane by
mixing oil in with fuel (in theory).  I also like it because I could
have a separate, small tank with just 2-stroke that can be gauged and
level-monitored.  The problem here is getting the correct ratio
according to variable RPM as well as inserting one more piece (electric
pump) that could fail.  I wonder if it'd be possible to run something
off the crank ...
 
What do you think?  Are you a fan of the intank setup?

B

Building an external oil injection pump is not
as simple as it looks. The pump must not only
respond to RPM it must respond to throttle opening
as well. HP in other words.

I took another look at the oil galleries that feeds the 
apex oil injection pump. I think I have figured a way
of feeding the pump two cycle oil instead of the junk
that comes out of the pan. 

First you need to plug the 3/16 hole
in the front cover  that communcates with the front
housing. Next to the oil injection pump on the front
cover there is a gallery plug. This plug is used
to block off the the apex oil gallery after the gallery
is drilled in production. If this is now drilled and taped
for a small tube fitting the stock oil pump could be fed
from an external source. 

Here is the rub. This feed must be a pressure feed. So 
you are going to need a small gear pump driven by the crank 
taking 2 cycle oil from a separate tank. 

It might be OK if the 2 cycle oil tank is mounted well
above the stock injection pump. The stock oil injection pump 
is designed with 50 to 60 psi in mind. You won't get 
that by mounting the 2 cycle oil feed tank in high places.

If this sounds like it is not worth it you could also come 
up with hand pump that put out three or four ounces per stroke.

A small hydraulic cylinder, a couple of one way ball check 
valves and a knob could be made to work.

The answer for Mazda would be to develope an synthetic 
apex seal oil that did not put out HC, NO or CO when it 
burned. Sell it by the case to RX7 owners and use a 
separate apex seal oil tank.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org