Russell Kent wrote:
I think Paul Lamar (but it could have been Brian D. Cain) wrote:
I took another look at the oil galleries that feeds the
apex oil injection pump. I think I have figured a way
of feeding the pump two cycle oil instead of the junk
that comes out of the pan.
IIRC Tracy and/or Paul Y. claimed that even Mazda's pump mechanism didn't
provide enough oil at prolonged high RPM (like one would use in an
aircraft). If that's true, then modifying the oil feed mechanism to the
stock oiler only makes it possible to provide an insufficient amount of oil
to the engine without having to mix it with the fuel. Not a very good
thing to work towards, IMNSHO. :-)
Now, once you have a separate feed mechanism for the oiler, you need to
modify the oiler to provide the proper amount of oil to the engine. Since
I haven't ever worked on the Mazda rotary, I have no idea how big a task
this would be.
Russell Kent
That is a very good point Russell. Mazda got carried away by the smog
rules and cut way back on the amount of oil injected in the late
engines. Probably too much IMHO. That is why Mazda needs special
oil and a separate supply.
The early pumps had a mechanical connection to the throttle so it
is probably easy to increase the supply. This I think was used
through 1991. It is called the "metering pump connecting rod".
Some models had the electronically controlled pump. This has
a stepping motor which takes the place of the throttle linkage.
If you can figure a way to lock this in "high" you are home
free. Now you have excess oil at light load with oil amount
proportional only to RPM. All second gen RX7's probably had
the stepping motor metering pump.
I would forget it and mix the oil with the gas :-)
One less thing to fail.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org