Subject: Paul Yaw Turbo rotary engine cost.
From: Paul
Date: 5/7/1999, 7:30 AM
To: zz

Paul Yaw wrote:

Paul wrote:

Mike Wills wrote:


Paul Y,
 The relatively flat torque curve and VE numbers from 4600 - 6500 are
really impressive. Was the 6.4 psi of boost you mentioned previously
consistant across this RPM range?

No, the boost was about 4 psi at 4000, and rose to 6.4 at 6300.  The
flat torque curve is the rotarys biggest asset..on the ground at least.

 Hope you dont mind my asking, but what would it cost to have you replicate
this engine? Not that I really want a turbo at the moment. I think its
gonna be enough of a challenge to cool a normally aspirated engine
initially, but I am curious.

Mike Wills

These guys paid $13,000 which included everything from the air filter to
the fuel pump. All they have to do is hook up power, ground, fuel, and
3" tubing from the turbo outlet to somewhere outside of the plane.  Oh
yeah, and an engine mount.  I haven't added up the parts cost yet.
Mostly because I am afraid to.  It went way over budget on time and
parts.  I don't have a solid number yet.  I would make several changes
so I am not sure but it would probably be at least $2,000 more.
Definitely not the cheapest way to get in the air, but supposedly much
cheaper than an AC engine with comparable power.  Besides, AC engines go
"Boing boing"  this engine goes "Hmmmmmmmmm!"


Don't forget cooling this beast.

I am rather surprised it is going into a 3500 pound gross, 45 foot
wing span airplane with a 2.17:1 PSRU. I would let it rev more
and use something around a 3:1 PSRU. I would also definetly
try to get an electric variable pitch prop to work.
If the rotary survives in this application it will survive in
anything. This is severe duty indeed.

BTW there is another project like this in the works in San Francisco.
The owners name is Lionel Jules and it is a Cessna 185 clone called
a Cyclone. This kit is made in Montreal. Lionel is planing on useing
two NA 13B's with belt drives to a common prop shaft. More than enough
room
in the 185 cowling to fit two 13B's side by side.

I need to get up there in the coming days and take some pictures.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org