JMLBlues@aol.com wrote:
I think one of the things that may occur during a loss of metering oil is
that the seal will be restricted from moving in its slot because of the
increased friction from the loss of oil (and perhaps from deposits that are
formed when the residual oil bakes). I don't think expansion of the seal in
the thickness direction is much of a problem. Don't forget that thermal
expansion is linearly related to the size of the part measured in the
direction of interest. If the seal temperature were raised by 1000 deg F, it
would still increase in thickness less than .001 inches. I agree with the
theories about the seals starting to bow as they get hot. Running without oil
will certainly make them hotter, as they will have friction heat input and
leakage of hot gas heating them. This is perhaps why the situation
deteriorates rather rapidly once a certain point has been reached.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org