Subject: Peripheral port verses side ports.
From: Paul
Date: 5/9/1999, 6:31 PM
To: zz

I found a new book by Kenichi Yamamoto not too long ago.

This book on the rotary is also  called "ROTARY ENGINE" 
published by Sankaido Co. Ltd. in 1981. This is an updated version of 
the first "ROTARY ENGINE" book. Confusing eh what? This book
also has a much greater emphasis on emmisions.

Never-the-less there was this chart on page 46 that lays to 
rest the myth of no HP or torque below 7000 RPM for a peripheral
port engine. For those interested in a port timing comparison
this too is shown. It is important however to keep the exhaust
back pressure at a minimum. This means a tuned system with pipes
about 32 inches long.

periside.jpg

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

periside.jpg