Subject: Banjo to AN -10 oil hose fitting.
From: Paul
Date: 5/10/1999, 10:39 PM
To: zz

Bill Freeman wrote:

Ed,

Banjos are pretty restictive fittings.  I would avoid them if at all
possible for high flow oil.  They are fine (if large enough) for fuel
or a brake or  pressure gauge line which has little or no flow, but
you will see a lot of pressure drop thru this type of fitting.  Your
AN elbow will have much less pressure drop.

Bill

Bill, you are missing a bit of data. With a plugs up engine
there is no room under the cowl for an elbow.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org