Anderson Ed wrote:
Thanks Perry,
I have the AN/Metric adapters from Mazdatrix, however they are straight
fittings and you have to add an AN-10 female elbow to get the hose
pointed in the right direction and that adds too much height and causes
it to interfer with top of my Cowl (I have the "plugs Up" engine
orientation). I took an AN-10 90 Fitting and had metric threads cut on
the block side. It works but has me a little concerned about its
holding power as so was looking for either an AN/Metric 90 elbow that
would work or a banjo fitting that I could put on the end of my
stainless steel braid hose.
Ed
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org