Subject: Affect of loss of lubrication and cooling on the apex seals.
From: Paul
Date: 5/11/1999, 7:34 AM
To: zz


JMLBlues@aol.com wrote:

The rotor housing temperature distribution is far from uniform in any
direction you care to take. The surface of the steel liner is far hotter (450
F or more at the plugs) than the backside of the aluminum in the water jacket
(200 F or so). The temperature also falls off rapidly in the circumferential
direction as you move away from the plugs. Temperature distribution is
difficult to measure. Measuring the actual thermal distortion in a running
engine (compounded by combustion pressure-induced deflections) is nearly
impossible. Computer models (finite element analysis) can give fairly trendy
indications of what happens, but the models are entirely dependent on
accurate experimental temperature and pressure data (garbage in garbage out).
Designing engines to account for the actual operational conditions is not a
trivial task. Often, what happens inside the engine is counter-intuitive. One
good test is worth a thousand theories. But its sometimes very hard to design
a good test.

Jon Lauter

Bill Freeman wrote:

Jon,

Having designed a few tests and made a heck of a lot of finite element
models, you are so right!    GIGO is a serious problem, and amateur
FEA folks scare me a bit at times - can they really assess the worth of
their model?  The old joke was (after the customer had left the area)
that we were just going to "push the analyze button".  The tools are
a lot better, but you still need good material properties data, actual
operating conditions data and an experienced analyst to get anything
useful out of a complex FEA.  Design a roof truss without much
experience?  Yes.  Do a complex 3D non-linear analysis with contact,
etc,etc.   Unlikely.

One of the real problems with testing is getting enough data points
(strain gauges or thermocouples) to do a good plot of the data
field.  A few points will help calibrate your FEA, but sometimes
is not enough.

Bill

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org