Subject: Banjo to AN -10 oil hose fitting.
From: Paul
Date: 5/11/1999, 7:23 AM
To: zz

Anderson Ed wrote:

Thanks Bill, I agree and do use a 90 AN elbow.  However I could not find
one with AN-10 on the hose end and metric on the block end, so I had a
metric thread machined on a standard AN-10/NPT - it works, but knowing
the old thread was machined off and the new metric tread cut into the
remaining metal makes me a little neverous about its life expectancy
(and hence my own). A standard AN elbow on the Mazdatrix adapter causes
the fitting to stick up too high, as Paul mentioned, for my "Plugs up"
engine and interfers with the cowl.

Ed Anderson


Oh I forgot. An RV6 has more room on the top (the side? :-)) 
than a Lancair.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org