Bill Freeman wrote:
Paul,
WOW! I just got back from a *really* interesting evening!
The local SAE Chapter had a Conoco Senior Lubrication Engineer
give a presentation on their new super exotic lube base oil.
These guys have just invested $750 million in the biggest
hydrocracking plant in the world to produce their new
"HYDROCLEAR" (tm) ultra quality water-clear lube base oil.
All their tests show that they match or beat synthetics in
high temp applications, and nearly match synthetics in
pour point, while costing only slightly more than conventional
lube oil bases, and with much less pollution in the process.
I had the honor of having dinner with the engineer prior to
the presentation and we discussed the whole rotary lube oil
situation. This guy is a motorhead (used to restore old
muscle cars, owns some hot turbo cars now) and is on the
SAE Lube Oils specifications committee, 20 yrs in the lube
oil business.
He agrees that the 500F oven test is a valid test for a lube
to be used in the comb chamber of rotaries. He says that the
upper limit for most crude-based oils is about 375 before they turn
into nasty gunk. He does not think 2 stroke oil in the crankcase
will last; wrong additives and not intended for that application.
Also, he agrees that the injection of crankcase oil into the
combustion chamber is going to gunk stuff up. He was a
bit doubtful about the mix-with-gas&burn test, since the
temperatures are pretty high, and the heat may carry away
some of the residue.
He says that most of the newer 2 strokes all use oil metered into
either the intake manifold or the fuel line. He likes my
fuel line venturi T oil metering system.
Conoco is selling their new motor oil thru a few outlets, but the
interesting part is that Pennzoil is a partner in this new
refinery, and they get almost half of this new ultra stable
base oil for their products.
I have asked him to get me a copy of his *excellent*
Powerpoint presentation, altho he will try to trim out some of
the snazzy graphics and photos since it is over 25 Mb!
If I can get it down to a reasonable size, I'll try to get it to
anyone who wants it, altho this might be tough. Maybe we
can get a text-only version.
Did you know that they are reducing the extreme pressure
additives in the latest API oil spec? SJ oil has LESS EP
additive (zinc dithiophosphate, or something like that) than SHoil
to help with O2 sensor life? He hedged a bit when I asked if
my old Porsche should use the latest oils, and finally said that
they still sell their earlier compounded high performance oil,
but made from the new improve base stock. The SJ is really
for new cars, beware in old cars since it is a little less protective
under extreme pressure conditions. The lower ring tension and roller tappets
in a lot of cars doesn't demand as much protection for boundary lube as in
the older cars. He still says their new oil is really
superior for stability, esp at high temps.
Bill
PS If we keep it down to a dull roar, I can ask him some
more specific questions. Would hate to burn him out by
asking a bunch of dumb or unimportant questions. Really
lucked into this one.
Good work Bill!
Way to go!
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org