Charles P. Kuss wrote:

Paul,
 I have done the same as Bruce, except I used the GM units on BMWs.
Before going into business for myself, I worked at Redline BMW
Performance in Pompano Beach, Fl. They ran a BMW in IMSA GTU. We
installed 2 GM ignition modules with a driver selectable switch (in case
of failure. We DNFed once because the Bosch unit died 3 laps from the
end. Ouch!)
 Be careful of the brand of module you purchase. I would recommend
either Delco or Standard. They are both made in the same factory. NAPA
is also very good. The quality of some of those cheap aftermarket units
is lacking.
Charlie Kuss

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org