David Carter wrote:
----- Original Message -----
From: Paul <rotaryeng@earthlink.net>
To: zz <rotaryeng@earthlink.net>
Sent: Tuesday, May 11, 1999 9:36 PM
Subject: Two stroke oil in the crankcase.
JMLBlues@aol.com wrote:
Dave Carter: Did you actually run two-stroke oil in the crankcase?!?!?
I am
very interested in how it worked out. I'd be concerned about bearing
wear,
corrosion of the iron parts, etc.
Jon
David Carter replied:
No, Jon, I have no engine yet. Just reading and interacting; planning; and
sharing my plans publicly to get validation/feedback. A couple of months
ago we had a severals weeks long exhchange about 2 stroke oil and one person
asked "Why not in the crankcase, if you are going to use the stock oil
injection?" We pursued that and got feedback that Mazda said it could be
done IF, IF, the oil had an SAE rating of 40 or better. I believe Paul
Lamar came up with that Mazda info from a paper on the Le Man (?) racer.
Anyway, I have zero actual experience but have dropped the idea of keeping
the oil injection and will pre-mix two stroke oil in the gas tank, adding it
before the gas is pumped in to get best possible mixing.
David Carter
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org