JMLBlues@aol.com wrote:
Ash type deposits usually require temperatures of above 700F or so to form.
They are based on metallic salts, and have a very light color appearance. The
hard, crusty tan deposits sometimes seen on the rotor, or on the spark plugs
of any engine (piston or rotary) that consumes a lot of oil are the ash
deposits.
The black deposits are the result of coking and breakdown of the
basestock. Mineral oils are complex compounds with fractions that have
different volatilities. I would guess that two stroke basestocks are more
carefully controlled in regards to enhanced volatility properties so that
they disappear before they have a chance to decompose into carbonaceous junk.
Both the ash and the non ash deposits are obviously detrimental, but the
additives that form ash are there for a reason -- ZDDP is an anti wear
additive and an antioxidant. Dispersants and detergents keep crankcase soot
and particles in suspension so the filter can get them. Calcium or magnesium
overbase additives are there to neutralize corrosive by product of combustion
which left unchecked would cause rapid bearing wear and less rapid wear of
iron components.
Oil is a very complex component of a successful engine. It
is unfortunate that there is not a real rotary engine oil out there and that
we are left to find the most suitable compromise. One interesting historical
footnote is that the original Dexron ATF formulation was designed as a rotary
engine lubricant. The original GM rotary concept was to use a common sump
with the engine and automatic transmission. The NSU RO-80 also uses this
configuration. Later ATFs (Dexron II) have different formulations, and I do
not know if they can be used as rotary lubricants, nor do I know if the
original Dexron would be acceptable in a Mazda.
Jon Lauter
Rotary Power Marine Corporation
j.lauter@rotarymarine.com
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org