Subject: After market 3 rotor.
From: Paul
Date: 5/13/1999, 5:13 AM
To: zz

Jeff Spitzer wrote:


"no shaft flexing here thankyou"

I'm ignorant to the internals of a 20B.  I always just assumed there were
three mains and that's why the extra center housing was so wide.  Am I to
understand that there are only two mains in a 20B?  If so I'm not so sure
I'd go around boosting the crap out of 'em.  The e-shaft flexing in a
2-rotor is pretty bad actually but its designed for it.  What some people
might not realize is that the rotary is kinda like a way oversquare piston
engine...really short stroke and huge bore.  Someone out there knows the
actual number but I'm guessing the rotor face has about 30 sq. in. of
projected area.  That means that at 1000 psi chamber pressure the rotor
bearing and shaft must endure 30,000 lb of force.  Ouch!  The idea of
suspending that between two distantly spaced bearings sounds like a recipe
for disaster.  Somebody please tell me I'm wrong.

Jeff Spitzer

Here is a better picture of a 3 rotor shaft showing the three mains.
3rot-parts.jpg

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

3rot-parts.jpg