Bob Darrah wrote:
Jeff Spitzer wrote:
Snip>>
picture of a 3 rotor shaft showing the three mains.
3rot-parts.jpg
Paul Lamar
A good picture, but don't try to use it as an assembly drawing!
The intake and spark
plugs will end up on one side and the exhaust on the other side.
By the way, the front (right hand side in picture) main and
coresponding throw (?) pull
off the end of the eccentric shaft to allow for assembly/dissassembly.
Bob Darrah
When I first published this picture we had a contest. You would have
won! :-)
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org