Subject: Ross Reduction Units & ratios.
From: Paul
Date: 5/14/1999, 9:00 PM
To: zz

kustom@oz.sunflower.org wrote:

Paul wrote:

What is the ratio? Very important.

Paul


Speaking of ratios, what ratio should we be looking for? my plan at this
time is to buy one of Tracy's PSRU as soon as he starts delivering them

Rod Sebby

Depends on the diameter and RPM of the prop. If takeoff performance,
such as a sea plane, large slow speed land plane or gyro coptor 
requires, I would go with a large diameter slow turning prop for 
high static thrust. That would mean a 3:1 PSRU. 

If you don't mind running your rotary at 7500 or 8000 RPM
for take off you will get a lot more power with a 3:1 PSRU for all
types of other airplanes with a normal diameter prop (68-72").

BTW Best to have a variable pitch prop in this case so you
can reduce the RPM  a lot and keep the torque up for lower BSFC
or fuel burn in cruise.

Most people are  useing a 2.17:1 PSRU with a fixed pitch prop and 
a max RPM of about 6200. That is what Tracy's initial offering will be 
as I understand it.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org