StJames515@aol.com wrote:

In a message dated 5/16/1999 1:50:14 AM Central Daylight Time,
rotaryeng@earthlink.net writes:

 MAR34807@aol.com wrote:
 >
 snip
 > Nip-denso 195500-2010 injectors (for non turbo).....flow a tested 147 to

149 cc of fuel per minute.......I think max is 550; 850s are also avail.

Tommy writes:
Where did the Max 550cc figure come from????  It is a long way from 147-149
to 550.....  Inquiring minds just want to know. :-)

If the max flow rate per injector is 550cc/min, at an 80% duty cycle, the
flow would be 440cc/min and with an estimated 20hp developed per 100cc, each
injector is capable of supporting 88 HP.  In theory only two injectors (See
Tracy Crook's 'limp home" mode) will  support 176 HP at that flow rate.

Tommy James<><

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org