Subject: 13B " Plugs Up " Engine Mount
From: Paul
Date: 5/19/1999, 4:05 PM
To: zz

larry_cox@ima.connections.com wrote:

Hi Paul and All,

 I haven't been on this newsletter too long, so I might have
missed earlier, photos or drawings, but I am interested in the
" plugs up " engine mount solutions. Especially how others have
attached the mount to the engine and redrive.

 Thought maybe Ed A. or Neil K. might have drawings or photos
of their attach points and brackets. I have an '87 13B and a Ross
redrive, that will be hung on the front of a Murphy Elite.

 I have the information from Tracy's manual on the auto
orientation mount system, but I may need to gain the 1.5 inches
that Neil talked about in order to keep the line of thrust where
it is supposed to be. I have the standard distributor ignition.

  Murphy is not helpful at all in giving thrust line location in
dimensions, but at least I was able to get the engine CG location
from them in a round about way.

  If this information has been posted at an earlier time, and a
repeat of it would clutter up the newsletter, you may send the
information to me off list at:

   larry_cox@ima.connections.com


  Larry Cox    Delta Junction, AK


If it was me Larry I would not go with plugs up. Asumming for the moment
that it was indeeed 1 1/2 inches lower (which, BTW I don't buy. But
measure 
it for yourself). IMHO it is not worth the trouble. The pan alone is a
major
fabrication project.

Never the-the-less there are drawings for a plugs up motor mount
and a plugs up pan on the ACRE NL web site the  address of which 
is below. There are also drawings for a simple alternator bracket to
move
the alternator to the side of the engine.


Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org