Subject: 13B " Plugs Up " Engine Mount.
From: Paul
Date: 5/19/1999, 4:42 PM
To: zz

Neil A. Kruiswyk wrote:

Paul,

    The pan is flat plate aluminum, cut with a jig saw.  All you have to do
is get it welded.  Compared to everything else that requires fabrication,
the pan was a breeze!!

    I'm not suggesting for a moment that plugs up is the only way.  But it
was the best way for my installation.

Neil

Paul Wrote;

The pan alone is a major fabrication project.

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org