Jeff Spitzer wrote:
At 08:36 PM 5/14/99 -0700, you wrote:
BTW According to this chart peripheral ports are very
sensitive to back pressure yet a turbo charged peripheral
port engine can generate 300 HP per rotor at 7500 RPM.
The turbo charged three rotor engine currently on Racing
Beat's dyno is that type of engine and is generating
those kinds of numbers.
Paul Lamar
Of course you realize that backpressure alone is not a very good indication
of why the performance of the charted engines is changing. The more
important variable is engine pressure ratio or the ratio of intake pressure
to exhaust pressure. In a turbo engine, although the exhaust pressure is
higher than N.A., the intake pressure is usually even higher than the
exhaust pressure. In fact, the N.A. engine will probably have higher
exhaust pressure than intake pressure (at the ports) when running. The
other important variable is port overlap. A peripheral port engine with
large overlap will be extremely sensitive to manifold pressure ratio. I'm
assuming the chart you provided was for a N.A. motor and that's why they
have ignored intake pressure. My point is: exhaust back pressure alone is
not a valid measure of "turbo power drain" Put another way: If the intake
pressure is higher than the exhaust pressure on a turbo engine (regardless
of the absolute value of either) the engine should be viewed as an air
"turbine" not a pump.
Jeff Spitzer
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org